Why does my fuse board need to be changed?



This is a question posed by many a householder, however of the reality is that it might not need to be changed. If the fuse board is damaged and there's a chance that people could touch "live" parts (risking an electric shock), then it does need to be changed.

The old fuse board will not meet the requirements of the BS7671 Wiring Regulations 17th Edition Ammendment 1 (2011). The fact that the installation does not meet the requirements doesn't mean it is illegal or indeed unsafe, however the new requirements are intended to make the installation "more" safe by reducing the chances of getting an electric shock.

In order for your domestic installation to meet the requirements of the "Regs" it must also meet the new RCD (Residual Current Device) requirements. RCDs cannot be fitted in older style fuse boards so if your installation needs to be brought up to date and made safer a new consumer unit will be needed.

There are numerous areas where RCDs are required, which should be rated at 30mA. These include;

  • Any cable buried in a wall or partition at a depth of less than 50mm from the surface requires protecting by an RCD unless it is protected by earthed metalwork such as conduit or trunking.
  • Any cable passing through a wall or partition that contains metal parts other than screws or nails.
  • Any cable that is installed outside the 'cable safe zones' needs protecting with both earthed metalwork and an RCD.
  • Every socket outlet rated 20A or less that is used by "ordinary persons" (i.e. home owners) intended for general use, require RCD protection.
  • Mobile equipment used outdoors rated up to 32A.
  • All circuits supplying power to a room that contains a bath or shower are required to be RCD protected.
If you ask an electrician to install a new socket and you do not have RCD protection, then this new work will need to meet the requirements. This could mean that your fuse board will need to be replaced so that the RCDs can be installed! This simple and relatively cheap job has now become much more expensive, but the end result is that your electrical installation is much safer.
 
Should you be planning to do this (or any other electrical task) yourself, have you considered taking one of Access Training's bespoke electrician courses? Whether you're looking to gain new DIY skills to help you around the home or professional qualifications in order to become an electrician, we can help you.
 
For more information contact us at 0800 345 7492.
 
- Mark Jenkins

Get in touch to learn more about our training courses!

First Name *
Surname *
Telephone Number *
E-mail address *
Ask A Question *
 
Security Character Security Character Security Character Security Character Security Character Security Character
Enter Letters (No Spaces) *